전체상품목록 바로가기

본문 바로가기

MEDIA AND IMAGES
현재 위치
  1. 게시판
  2. K-TIG 자료실

K-TIG 자료실

K-TIG DATABASE

게시판 상세
제목 K-TIG 3044IN SCH40 단일패스, 완전 용입 키홀 GTAW, 고-저 불일치
작성자 삼진웰텍 (ip:)
  • 평점 0점  
  • 작성일 2022-09-08 13:24:59
  • 추천 추천하기
  • 조회수 185

K-TIG 정보:

Keyhole TIG는 GTAW/TIG의 고속, 고생산성 변형 모델입니다. K-TIG는 GTAW의 8배 용입을 가지고 있어 원주 및 종방향 모두에서 개선 없이 단일 패스로 최대 5/8인치(16mm) 두께의 재료에서 X선 품질 용접을 수행할 수 있습니다.

K-TIG는 기존의 6시간 TIG 용접을 3분 이내에 수행하므로 용접 시간이 99% 단축됩니다. 전체 비용 절감액(시간, 인건비, 전선, 가스, 준비, 그라인딩)은 일상적으로 80-95% 범위입니다.

K-TIG는 19개국에 K-TIG 1000 용접 시스템을 제공했으며, 미국은 지리적으로 가장 큰 고객 부문입니다.

이 기술은 튜브 공장, 파이프 공장 및 광범위한 일반 제조 응용 외에도 석유 및 가스, 발전, 수처리, 재생 에너지, 원자력 및 방위 산업 분야에서 널리 사용되고 있습니다.

ASME 용기, 탱크 및 배관은 여러 분야 중 가장 큰 고객층입니다.



About K-TIG: 

Keyhole TIG is a high-speed, high-productivity variant of GTAW/TIG. K-TIG has 8x the penetration of GTAW, allowing it to perform x-ray quality welds in materials up to 5/8 inch (16mm) thick in a single pass without the need for edge bevelling in both circumferential and longitudinal applications.

K-TIG performs a conventional 6 hour TIG weld in less than 3 minutes – a 99% reduction in welding time. Overall cost savings (time, labour, wire, gas, preparation, grinding) are routinely in the range of 80-95%. 

K-TIG has provided the K-TIG 1000 Welding System to 19 countries, with the USA being the largest customer segment by geography. 

The technology is being used widely in the oil & gas, power generation, water treatment, renewable energy, nuclear and defence industries, in addition to tube mills, pipe spooling and a wide variety of general fabrication applications. 

ASME vessels, tanks and piping are the largest customer segment by application.

첨부파일 42.png
비밀번호 삭제하려면 비밀번호를 입력하세요.
댓글 수정

비밀번호 :

/ byte

비밀번호 : 확인 취소

댓글 입력
댓글달기 이름 : 비밀번호 : 관리자답변보기

영문 대소문자/숫자/특수문자 중 2가지 이상 조합, 10자~16자

/ byte

왼쪽의 문자를 공백없이 입력하세요.(대소문자구분)

회원에게만 댓글 작성 권한이 있습니다.

WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close